Where every frame is cut, welded and prepared
Our own fabrication workshop in Bhaluka, Mymensingh — not a subcontracted workshop — is where primary frames, purlins and cladding are cut, drilled, welded and coated to drawing before they ever reach a site.
Factory address
North Kasor, Square Master Bari, Bhaluka, Mymensingh
Factory hotline
+880 1729-298935Factory email
universalssltdfac@gmail.comFabrication kept in-house, start to finish
Cutting, forming, welding, coating and quality checks happen under our own roof — not queued behind a third-party workshop's schedule.
Auto Welding Machine
H-beam workstation for assembly welding and straightening.
CNC Cutting Machine
Multi-head cutting machine — 9 strip-flame torches plus 2 CNC flame cutting torches.
H-Beam Flange Straightening Machine
Corrects flange alignment on built-up H-beam sections before assembly.
ARC Welding Machine
Manual arc welding for structural connections and repairs.
Assembling Machine
Positions and tacks built-up sections ahead of full welding.
Shear Cutting Machine
Straight-line shearing of steel plate and sheet to size.
Sheet Profile Machine
Roll-forms profiled roof and wall cladding sheets.
Magnet Drill Machine
Portable magnetic-base drilling for site and workshop steel.
MIG Welding Machine
Gas metal arc welding for faster, cleaner structural joints.
Sand Blasting Machine
Surface preparation before priming and coating.
Paint Spray Machine
Even, controlled application of primer and finish coats.
Stand Drill Machine
Bench-mounted precision drilling for plates and connections.
Radial Drilling Machine
Drills large or heavy sections that can't be moved to a bench drill.
Ironworker Machine
Combined punching, shearing and notching of structural steel.
Generator
Independent power supply keeping fabrication running without interruption.
Saw Welding Machine
Submerged-arc welding for long, consistent structural seams.
Every frame engineered to hold its line — from foundation bolt to roof ridge.
What actually goes into a structure
The components, grades and coatings our steel buildings are fabricated from.
| Component | Specification | Strength |
|---|---|---|
| Built-up section | M.S. Plate — ASTM A572-50 grade | Fy = 345 MPa |
| Purlin and girt | Rolled formed steel, minimum yield stress 275 MPa | Fy(min) = 275 MPa |
| Roof and wall cladding | Hi-Ten painted 0.47mm steel, 55% aluminium / 45% zinc coating, AS1397 G550-AZ150 | Fy = 550 N/mm² |
| Anchor bolts | Galvanized / naturally quenched black | Fy = 24.5–35.0 kN/cm² |
| High-strength bolts | A325M Type 1, hot-dip galvanized / naturally quenched black | Ft = 55 kN/cm² |
See where your structure gets built
From site measurement through to fabrication in Bhaluka and erection on your site — one accountable team, start to finish.